Led post-modern ceiling lamp as a popular lamp, with excellent features is indispensable, led post-modern ceiling lamp features green, more energy-saving than energy-saving lamps, at night, led post-modern ceiling lamp light High brightness, but will not puncture the eyes, soft light, can change a variety of colors, the performance is very good.

LED post-modern ceiling lamp maintenance method

1, you need to remember to buy the lamps, do not be busy to install, you should carefully look at the markings of the lamps and read the installation and use of the imitation, and then install and use the lamps according to the rules of the imitation, otherwise there may be risks.

2. According to the light source parameters supplied by the sign, change the aging lamp in time, and find that the two ends of the lamp are red, the lamp is black or there is black shadow, and the lamp is not bright, the lamp should be changed in time to prevent the ballast from appearing. Burnt out, etc.

3. During clean maintenance, care should be taken not to change the structure of the luminaire, and do not change the parts of the luminaire at will. After the end of clean maintenance, the luminaire should be installed as it is, and the parts of the luminaire should not be missed or misplaced;

4. When using LED lamps, try not to switch them repeatedly, which will greatly shorten the service life of LED lamps.

LED post-modern ceiling lamp installation considerations

1. Before installation, carefully look at the markings of the lamps and read the installation instructions. Install the lamps according to the instructions in the instructions and use the lamps according to the rules of use in the instructions.

2. According to the light source parameters provided by the sign, replace the aging lamp in time, and find that the two ends of the lamp are red. When the lamp does not illuminate, the lamp should be replaced in time to prevent the ballast from being burnt out and other unsafe phenomena.

3, after installing the modern ceiling lamp, we must first prepare the required installation tools, that is, electric hammer or electric drill, wire stripper, pencil, large and small Phillips screwdriver, expansion screw, wherein the purpose of the electric drill is to It is convenient to use when drilling holes in the pouring floor. The hammer is a bit heavy and it is not convenient to use. Therefore, it is recommended that you use the electric drill, which is small and convenient.

4. Pay attention to cleaning and maintenance. Do not change the structure of the lamp, and do not replace the parts of the lamp. After the cleaning and maintenance, the lamp should be installed as it is. Do not miss or misplace the lamp parts.